Request a Catalog

To receive our complete catalog via postal mail send $3 along with your name and address to:

Langdon’s Stovebolt
47950 Robin, Utica, MI 48317

——————————————————————————–

…or use the PayPal button below to
order our complete catalog.

Be sure to use the correct shipping address when ordering. This is the address to which the catalog is mailed after payment is accepted.

Langdon’s Stovebolt Catalog

By August 3, 2010

12 Comments to “Request a Catalog”

  1. By J.Perez, July 20, 2011 @ 11:58 am

    Hi all, I’m looking to replace the 4.10s in my ’40 chevy 3/4t, and I was wondering if 3.55s that are offered for the 1/2t model, will fit mine? By the way, Im going to be running the torque driveline set up and not Planning on removing it. Thanks for your help!

    • Tom

      By Tom, July 22, 2011 @ 1:51 pm

      J. Perez,
      Sorry, I can’t help.
      I thought the 1940 3/4 Ton had a 4.56 ratio and was NOT a torque tube.
      The 1/2 Ton was 4.11 with a torque tube.
      Tom

  2. By rick collins, April 18, 2011 @ 2:59 pm

    iI HAVE A 1965 CHEVELLE WITH A INLINE 6 230CU IN . I AM LOOKING FOR A PARTS SUPPLIER , TO HOP UP ENGINE . LIKE INTAKE, CARBS, & MAYBE HEADERS. CAN YOU HELP ME OR TELL ME WHO TO SEE? THANK YOU RICK

    • Tom

      By Tom, April 19, 2011 @ 1:58 pm

      Rick,
      Yes, we can supply any performance related parts for your inline six.
      Tom

    • By Nolan Leupp, October 13, 2011 @ 12:19 am

      Hey, I have the same setup in the same car, but the only headers i can find for my 230 and my other 194 are for a truck and won’t fit. Can you help?

      • Tom

        By Tom, October 28, 2011 @ 3:27 pm

        Nolan,
        Yes, we have cast iron headers that fit perfect.
        Tom

  3. By Scott, April 14, 2011 @ 5:29 pm

    I have a 71 nova with a stock 250. I want to put a 4 barrel on it and headers. What do you suggest i run for a carb? I plan on purchasing your intake 4 barrel manifold.

    • Tom

      By Tom, April 17, 2011 @ 8:39 pm

      Either a Holley 390 or Edlebrock 500 four barrel will work well on a water heated Offy Manifold.

  4. By steven j. schank, March 28, 2011 @ 10:16 am

    I have a 1974 buick apollo w/ a 250 i-6 and am wondering how well is my 1-barrel going to do this summers gas crunch.. suggestions.??? and any exhuast or intake suggestions are welcome as well. thanx..

    • Tom

      By Tom, April 4, 2011 @ 12:25 pm

      Steven,
      Sorry, I don’t know the condition of your carburetor or your engine so I can’t comment.
      Tom

  5. By Jay Bamba, December 29, 2010 @ 12:28 am

    Hello i have a 1953 chevy 210. im trying to mount a 250ci engine into it using the original motor mounts, do you have a kit or bracket, that i can use to mount the motor to the mounts i already have? or would i have to switch everything over. i pulled the motor out of a 76 c10.

    thanks
    jay

    • Tom

      By Tom, January 6, 2011 @ 7:23 pm

      We sell a complete kit for this combination ($140.00 + $10.70 shipping) it includes new bolt in frame mounts.

Stop SOPA